Packages / openSUSE Leap 16.0 / Development/Libraries/Perl / perl-Switch

Package: perl-Switch (2.17-160000.2.2)

A switch statement for Perl, do not use if you can use given/when

The Switch.pm module implements a generalized case mechanism that covers most (but not all) of the numerous possible combinations of switch and case values described above. The module augments the standard Perl syntax with two new control statements: 'switch' and 'case'. The 'switch' statement takes a single scalar argument of any type, specified in parentheses. 'switch' stores this value as the current switch value in a (localized) control variable. The value is followed by a block which may contain one or more Perl statements (including the 'case' statement described below). The block is unconditionally executed once the switch value has been cached. A 'case' statement takes a single scalar argument (in mandatory parentheses if it's a variable; otherwise the parens are optional) and selects the appropriate type of matching between that argument and the current switch value. The type of matching used is determined by the respective types of the switch value and the 'case' argument, as specified in Table 1. If the match is successful, the mandatory block associated with the 'case' statement is executed. In most other respects, the 'case' statement is semantically identical to an 'if' statement. For example, it can be followed by an 'else' clause, and can be used as a postfix statement qualifier. However, when a 'case' block has been executed control is automatically transferred to the statement after the immediately enclosing 'switch' block, rather than to the next statement within the block. In other words, the success of any 'case' statement prevents other cases in the same scope from executing. But see the "Allowing fall-through" manpage below. Together these two new statements provide a fully generalized case mechanism: use Switch; %special = ( woohoo => 1, d'oh => 1 ); while (<>) { chomp; switch ($_) { case (%special) { print "homer\n"; } # if $special{$_} case /[a-z]/i { print "alpha\n"; } # if $_ =~ /a-z/i case [1..9] { print "small num\n"; } # if $_ in [1..9] case { $_[0] >= 10 } { print "big num\n"; } # if $_ >= 10 print "must be punctuation\n" case /\W/; # if $_ ~= /\W/ } } Note that 'switch'es can be nested within 'case' (or any other) blocks, and a series of 'case' statements can try different types of matches -- hash membership, pattern match, array intersection, simple equality, etc. -- against the same switch value. The use of intersection tests against an array reference is particularly useful for aggregating integral cases: sub classify_digit { switch ($_[0]) { case 0 { return 'zero' } case [2,4,6,8] { return 'even' } case [1,3,5,7,9] { return 'odd' } case /[A-F]/i { return 'hex' } } }

Package information

Homepage
[http://search.cpan.org/dist/Switch/]
License
Artistic-1.0 or GPL-1.0+
Downstream-Paketbetreuer
Unbekannt: in der indizierten Quelle nicht gemeldet
Quellpaket
[perl-Switch]
Software project
[perl-Switch]

Versions and downloads for perl-Switch

Version / releaseArchitecture / repositoryPackage sizeInstalled sizeFilesPublisher repository artifact
2.17-160000.2.2leap-16.0 / ossnoarchopenSUSE Leap 16.0 · OSS · multi-architecture27 KiB38 KiBlist of filesperl-Switch-2.17-160000.2.2.noarch.rpm
About these downloads

Jede Zeile ist Paketindex-Metadaten für eine Version, Architektur, Suite und ein Repository. Namen, URLs und Größen stammen aus der Quelle; ein Link ist ein veränderbarer Abrufort, kein Weitergabanspruch von OpenFactory.

Dependencies and recommendations for perl-Switch

  • dep: perl(:MODULE_COMPAT_5.42.0)

    Package not available

  • dep: perl(Text::Balanced) (>= 2)

    Package not available

Paketdateipfade (5)

Paths come from the repository package-file index for the observed builds. They describe archive/package associations, not every file that will exist on a running system after maintainer scripts, alternatives, generated state, diversions, or installation choices.

  • /usr/lib/perl5/vendor_perl/5.42.0/Switch.pm
  • /usr/share/doc/packages/perl-Switch
  • /usr/share/doc/packages/perl-Switch/Changes
  • /usr/share/doc/packages/perl-Switch/README
  • /usr/share/man/man3/Switch.3pm.gz

Field source: openSUSE Leap 16.0 OSS

Bekannte Sicherheitslücken

Keine passenden Meldungen in den erfassten Quellen.

Zuletzt synchronisiert:

[CVE-Katalog]

Prüfsummen

Repository signatures authenticate metadata. Artifact hashing is recorded separately. Neither establishes package safety.

2.17-160000.2.2 / noarchBeobachtet Sep 1, 2026sha512 31b951882732…b0c3d38cPrüfsumme der Quelle

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Prüfsumme der Quelle (sha512): 31b9518827323d2d8f2d42d1b8bf1fe24603a4a270f780a2f17381cdf8eaa941a2f6aae6a5f5689d6448c46ecaf7d228208b5d734a394d122a0441cdb0c3d38c

Field source: openSUSE Leap 16.0 OSS

Quellen

  • Authoritative source; repository metadata signature verified

    Signaturnachweis

    leap-16-0-oss-multiarch:271b36d440253edf9871ac0c100319fc7443d8f2d54b6b449a72e9414c51577c

    Repository-signature verification record
    Signed-object SHA-256
    271b36d440253edf9871ac0c100319fc7443d8f2d54b6b449a72e9414c51577c
    Signer fingerprint
    AD485664E901B867051AB15F35A2F86E29B700A4
    Keyring revision
    opensuse-project-signing-key.asc
    SHA-256 b5745739ebfb95b25b8e810f9bcb847fe750ccda598bd85f02f0e974599a6d7e
    Tool and policy
    gpgv (GnuPG) 2.4.9
    openfactory-software-catalog-signature-v1
    Verification time
    Sep 1, 2026
    Repository metadata hash linkage
    Result
    Recorded as verified; digest details unavailable

Dieses Paket verwenden

OpenFactory kann dieses Betriebssystem in einer Browser-VM starten oder einen Image-Build mit dem nativen Paketnamen aus diesem Datensatz beginnen.