Hardware and engineering · Runs in your browser
Ohm's Law Calculator
Solve voltage, current, resistance and power from a selected pair of positive electrical quantities.
Files stay in this browser tab.
How to use it
Choose the two quantities you know and enter their values in volts, amperes, ohms or watts.
Worked example
12 volts across 1000 ohms gives 0.012 amperes and 0.144 watts.
What to check
This calculator uses the ideal resistive relationships. It does not model transient, reactive or safety-critical circuits.
Build a system for this use case
Electronics design workstation
Example OpenFactory build prompt
Build a useful electronics design workstation on Ubuntu 24.04 LTS amd64, unless the target installer or embedded board requires its explicitly selected OS.
Use KiCad, ngspice and a versioned example circuit library. Include only the components this workload needs. Use synthetic sample data and placeholders for site-specific domains, authorized SSH public keys and external integration credentials. Create a non-root operator and keep administrative access private. Never put real credentials, patient records or customer data in the image.
Acceptance checks: open a sample schematic, simulate a resistor circuit and compare the measured current with the expected calculation. Boot the actual artifact and repeat relevant health, persistence and access checks after reboot. Keep hardware-dependent checks pending until the specified equipment is attached.
Deliver the bootable image or reproducible deployment recipe, the software inventory and a test report that separates successful assembly from runtime verification. Ask for missing hardware, storage and access details before making irreversible deployment choices. Do not deploy into production or erase an existing disk without an explicit target.Your tool inputs and files are not included in the build prompt. Review the draft and press Send in OpenFactory.
Source
NIST: SI units for electrical quantitiesOpenFactory · 2026-10-29
