Source Package: apcupsd (3.14.14-39.fc43)
APC UPS Power Control Daemon
Apcupsd can be used for controlling most APC UPSes. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exausted, a timeout (seconds) expires, or the battery runtime expires based on internal APC calculations determined by power consumption rates. If the power is restored before one of the above shutdown conditions is met, apcupsd will inform users about this fact. Some features depend on what UPS model you have (simple or smart).
Package information
- Homepage
- [http://www.apcupsd.com/]
- License
- GPL-2.0-only
- Downstream package maintainer
- germano, limb, sandeenObserved Nov 19, 2026 [source]
The following binary packages are built from this source package:
- apcupsd
APC UPS Power Control Daemon
- apcupsd-cgi
Web interface for apcupsd
- apcupsd-gui
GUI interface for apcupsd
