Packages / openSUSE Tumbleweed / Hardware/Scanner / sane-backends-autoconfig

Package: sane-backends-autoconfig (1.3.1-3.8)

USB Scanner Autoconfiguration

USB scanner autoconfiguration happens via udev. The file /udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is "complete" or "good", and which do not require firmware upload. When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated). It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected. If you do not like automated driver activation, do not install this package or remove it when it is already installed.

Package information

Homepage
[http://www.sane-project.org/]
License
GPL-2.0-or-later AND LGPL-2.1-or-later AND SUSE-Public-Domain
Downstream package maintainer
Unknown: not reported in the indexed source
Source package
[sane-backends]
Software project
[sane-backends]

Versions and downloads for sane-backends-autoconfig

Version / releaseArchitecture / repositoryPackage sizeInstalled sizeFilesPublisher repository artifact
1.3.1-3.8tumbleweed / ossnoarchopenSUSE Tumbleweed · OSS · multi-architecture31 KiB73 KiBlist of filessane-backends-autoconfig-1.3.1-3.8.noarch.rpm
About these downloads

Each row is recorded package-index metadata for one version, architecture, suite, and repository. Names, URLs, and sizes are source-reported; a link is a potentially mutable retrieval location, not an OpenFactory redistribution claim or proof that OpenFactory retained the artifact bytes.

Other packages built from sane-backends

Dependencies and recommendations for sane-backends-autoconfig

  • dep: [libsane1] (= 1.3.1)

    Kärnbibliotek för SANE

  • enh: [sane-backends]

    SANE (Scanner Access Now Easy) Scanner Drivers

Package file paths (1)

Paths come from the repository package-file index for the observed builds. They describe archive/package associations, not every file that will exist on a running system after maintainer scripts, alternatives, generated state, diversions, or installation choices.

  • /usr/lib/udev/rules.d/56-sane-backends-autoconfig.rules

Field source: openSUSE Tumbleweed OSS

Known vulnerabilities

CVESeverityVersion impact
[CVE-2020-12861]

Published:

sane-backends: CVE-2020-12861

High(8.8)Unknown
Details (1)
  • 1.3.1-3.8 · noarch · tumbleweed

    Unknown · Fixed: 1.0.31-lp151.6.3.1, 1.0.31-lp152.7.3.1

    Version impact unknown

    pypi · sane-backends · opensuse · leap 15.2; pypi · sane-backends · opensuse · leap 15.1

Last synced:

[CVE catalog]

Checksums

Repository signatures authenticate metadata. Artifact hashing is recorded separately. Neither establishes package safety.

1.3.1-3.8 / noarchObserved Sep 1, 2026sha512 92ee3618d2d8…2a9d0a32Source-reported digest

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported digest (sha512): 92ee3618d2d8ed00e4dad3228e1ba66500c60573c7cf10c8f9b9a438ce427e8ba3cfbcfe537b610d7072aea47534c3c8d99441f94dbc76bb661b31b22a9d0a32

Field source: openSUSE Tumbleweed OSS

Sources

  • Authoritative source; repository metadata signature verified

    Signature evidence

    tumbleweed-oss-multiarch:4db10cdde3ad82c7e22be35753c9e164b4bdd30f92db4aee17a0d4c94c5f902f

    Repository-signature verification record
    Signed-object SHA-256
    4db10cdde3ad82c7e22be35753c9e164b4bdd30f92db4aee17a0d4c94c5f902f
    Signer fingerprint
    AD485664E901B867051AB15F35A2F86E29B700A4
    Keyring revision
    opensuse-project-signing-key.asc
    SHA-256 b5745739ebfb95b25b8e810f9bcb847fe750ccda598bd85f02f0e974599a6d7e
    Tool and policy
    gpgv (GnuPG) 2.4.9
    openfactory-software-catalog-signature-v1
    Verification time
    Sep 1, 2026
    Repository metadata hash linkage
    Result
    Recorded as verified; digest details unavailable

Use this package

OpenFactory can boot this operating system in a browser VM, or start a build that includes the native package name from this record.