Packages / openSUSE Leap 15.6 / Hardware/Scanner / sane-backends-autoconfig

Package: sane-backends-autoconfig (1.0.32-150400.15.2.1)

USB Scanner Autoconfiguration

USB scanner autoconfiguration happens via udev. The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is "complete" or "good", and which do not require firmware upload. When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated). It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected. If you do not like automated driver activation, do not install this package or remove it when it is already installed.

Package information

Homepage
[http://www.sane-project.org/]
License
GPL-2.0+ and LGPL-2.1+ and SUSE-Public-Domain
Downstream package maintainer
Unknown: not reported in the indexed source
Source package
[sane-backends]
Software project
[sane-backends]

Versions and downloads for sane-backends-autoconfig

Version / releaseArchitecture / repositoryPackage sizeInstalled sizeFilesPublisher repository artifact
1.0.32-150400.15.2.1leap-15.6 / ossaarch64openSUSE Leap 15.6 · OSS · multi-architecture30 KiB68 KiBlist of filessane-backends-autoconfig-1.0.32-150400.15.2.1.aarch64.rpm
1.0.32-150400.15.2.1leap-15.6 / ossppc64leopenSUSE Leap 15.6 · OSS · multi-architecture30 KiB68 KiBlist of filessane-backends-autoconfig-1.0.32-150400.15.2.1.ppc64le.rpm
1.0.32-150400.15.2.1leap-15.6 / osss390xopenSUSE Leap 15.6 · OSS · multi-architecture30 KiB68 KiBlist of filessane-backends-autoconfig-1.0.32-150400.15.2.1.s390x.rpm
1.0.32-150400.15.2.1leap-15.6 / ossx86_64openSUSE Leap 15.6 · OSS · multi-architecture30 KiB68 KiBlist of filessane-backends-autoconfig-1.0.32-150400.15.2.1.x86_64.rpm
About these downloads

Each row is recorded package-index metadata for one version, architecture, suite, and repository. Names, URLs, and sizes are source-reported; a link is a potentially mutable retrieval location, not an OpenFactory redistribution claim or proof that OpenFactory retained the artifact bytes.

Other packages built from sane-backends

Dependencies and recommendations for sane-backends-autoconfig

  • dep: [sane-backends]

    SANE (Scanner Access Now Easy) Scanner Drivers

  • enh: [sane-backends]

    SANE (Scanner Access Now Easy) Scanner Drivers

Package file paths (3)

Paths come from the repository package-file index for the observed builds. They describe archive/package associations, not every file that will exist on a running system after maintainer scripts, alternatives, generated state, diversions, or installation choices.

  • /etc/udev
  • /etc/udev/rules.d
  • /etc/udev/rules.d/56-sane-backends-autoconfig.rules

Field source: openSUSE Leap 15.6 OSS

Known vulnerabilities

CVESeverityVersion impact
[CVE-2020-12861]

Published:

sane-backends: CVE-2020-12861

High(8.8)Unknown
Details (4)
  • 1.0.32-150400.15.2.1 · aarch64 · leap-15.6

    Unknown · Fixed: 1.0.31-lp151.6.3.1, 1.0.31-lp152.7.3.1

    Version impact unknown

    pypi · sane-backends · opensuse · leap 15.2; pypi · sane-backends · opensuse · leap 15.1

  • 1.0.32-150400.15.2.1 · ppc64le · leap-15.6

    Unknown · Fixed: 1.0.31-lp151.6.3.1, 1.0.31-lp152.7.3.1

    Version impact unknown

    pypi · sane-backends · opensuse · leap 15.2; pypi · sane-backends · opensuse · leap 15.1

  • 1.0.32-150400.15.2.1 · s390x · leap-15.6

    Unknown · Fixed: 1.0.31-lp151.6.3.1, 1.0.31-lp152.7.3.1

    Version impact unknown

    pypi · sane-backends · opensuse · leap 15.2; pypi · sane-backends · opensuse · leap 15.1

  • 1.0.32-150400.15.2.1 · x86_64 · leap-15.6

    Unknown · Fixed: 1.0.31-lp151.6.3.1, 1.0.31-lp152.7.3.1

    Version impact unknown

    pypi · sane-backends · opensuse · leap 15.2; pypi · sane-backends · opensuse · leap 15.1

Last synced:

[CVE catalog]

Checksums

Repository signatures authenticate metadata. Artifact hashing is recorded separately. Neither establishes package safety.

1.0.32-150400.15.2.1 / aarch64Observed Sep 1, 2026sha512 7397ac523627…7d9d413fSource-reported digest

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported digest (sha512): 7397ac523627e57257491dc1774482dafe17ac95df712beb9b6b96bbda3e2fa06c042330e8903970f422173c4594b4a413e25103422accd6062f39f07d9d413f

Field source: openSUSE Leap 15.6 OSS

1.0.32-150400.15.2.1 / ppc64leObserved Sep 1, 2026sha512 cec9dacd5c85…26646f69Source-reported digest

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported digest (sha512): cec9dacd5c8520a40183ec1ecb198e79244cb1b11a49ffa4ccb8b631fc9f910e0b170b13cec204534342145811c7ab0d4919e37fb3f666a148f8fde726646f69

Field source: openSUSE Leap 15.6 OSS

1.0.32-150400.15.2.1 / s390xObserved Sep 1, 2026sha512 cc3074329823…90dfb171Source-reported digest

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported digest (sha512): cc30743298236c110fdd9f51b169785e6f238c1e19bce5777249e10719ca6614a10cd1dcd4b0ee65f242e0e93cbfa718f9e4c712b193c9015ad9345c90dfb171

Field source: openSUSE Leap 15.6 OSS

1.0.32-150400.15.2.1 / x86_64Observed Sep 1, 2026sha512 b6af75f3ba68…db5784e9Source-reported digest

Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported digest (sha512): b6af75f3ba6874f5c976753e5fede9f5139acdac9f2b31f9343f2c6711b06d7b93e066c1dc1439f27e36e064aa23d2f93774ef75adee75699c583958db5784e9

Field source: openSUSE Leap 15.6 OSS

Sources

  • Authoritative source; repository metadata signature verified

    Signature evidence

    leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

    Repository-signature verification record
    Signed-object SHA-256
    ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230
    Signer fingerprint
    AD485664E901B867051AB15F35A2F86E29B700A4
    Keyring revision
    opensuse-project-signing-key.asc
    SHA-256 b5745739ebfb95b25b8e810f9bcb847fe750ccda598bd85f02f0e974599a6d7e
    Tool and policy
    gpgv (GnuPG) 2.4.9
    openfactory-software-catalog-signature-v1
    Verification time
    Sep 1, 2026
    Repository metadata hash linkage
    Result
    Recorded as verified; digest details unavailable

Use this package

OpenFactory can boot this operating system in a browser VM, or start a build that includes the native package name from this record.